Radiologic Technologist resume examples
This page has 8 one-page radiologic technologist resume examples, from a new X-ray technologist to radiologic, CT, MRI and mammography technologists and senior interventional radiology, cath lab and special procedures technologists. Each one is checked against 23,351 US postings from 1,544 employers, and the note under each sample says which registrations, exam volumes and radiation safety results it puts first.
Radiologic Technologist Resume Example
Radiologic technologist postings most often ask for ARRT registration and a degree from an accredited radiologic technology program, so both sit in the certificates and education sections where a recruiter checks first. The bullets cover the duties employers write most, preparing and positioning patients, ALARA radiation protection and image quality review in PACS, each with a volume or audit result.
Why this resume works:
- Perform 35-45 radiographic procedures per shift across the ED, inpatient floors and OR, including portable and trauma series.
- Position patients for about 60 fluoroscopy exams a month, keeping sterile technique during joint injections and arthrograms.
- Review every image for quality in PACS before release, holding a personal repeat rate under 3% in two annual audits.
MRI Technologist Resume Example
MRI technologist postings name MRI procedures, cross-sectional anatomy, MRI safety and venipuncture most, and each one appears in a bullet with a scan volume, safety record or first-stick rate. The ARRT (MR) registration employers require is listed under certificates, and 6 years on 1.5T and 3T scanners clears the 1 year most postings ask for.
Why this resume works:
- Complete 18-22 scans per shift across neuro, MSK, prostate and breast MRI procedures on 3T and 1.5T systems.
- Verify each patient and implant card against Zone III and IV MRI safety rules, with zero safety events in 3 years.
- Establish IV access by venipuncture for gadolinium studies, reaching a 96% first-stick rate on about 10 contrast exams a shift.
CT Technologist Resume Example
CT technologist postings ask first for ARRT registration, CT experience, cross-sectional anatomy, venipuncture and radiation safety, and this resume shows each one in a bullet tied to scan volume, stroke times or dose audits. Both ARRT credentials sit under certificates, and the path from radiographer to CT explains how the 125 required CT procedures were earned.
Why this resume works:
- Complete 25-30 CT scans per shift, using cross-sectional anatomy to plan trauma, CTA and abdomen-pelvis studies.
- Run code stroke CT procedures on 2 CT scanners, reaching images in a median 14 minutes against a 20-minute goal.
- Apply weight-based dose protocols and ALARA shielding, keeping CTDIvol within ACR reference levels on 98% of audited exams.
Mammography Technologist Resume Example
Mammography postings name mammography procedures and equipment, quality control, breast anatomy and a compassionate manner with patients, and each appears in a bullet backed by daily volume, MQSA inspections or comfort scores. The ARRT (R) and (M) registrations employers require are listed under certificates with dates that match the 5 years in the summary.
Why this resume works:
- Perform 25-30 screening and diagnostic mammography procedures per day on 3D tomosynthesis mammography equipment.
- Run daily, weekly and monthly MQSA quality control tests on 3 units, passing every annual physicist and FDA inspection.
- Position patients for stereotactic and ultrasound-guided biopsies with 2 radiologists, about 40 procedures a month.
X-Ray Technologist Resume Example
X-ray technologist postings ask for ARRT registration, an accredited radiography program and ALARA radiation protection, so the credential, the degree and the dose habits appear before anything else. With only 14 months on the job, the clinical rotation bullets show the hours and competencies that fill the 1 year of experience employers prefer.
Why this resume works:
- Perform 25-35 chest, extremity, spine and sinus X-rays per shift as the only imaging staff member on site.
- Apply ALARA collimation, shielding and the pediatric technique chart on about 40 child exams a month to limit dose.
- Send images to PACS with correct views, markers and HIPAA-safe notes, keeping radiologist rejections below 2%.
Interventional Radiology Technologist Resume Example
Interventional radiology postings ask most for sterile technique, radiation safety, fluoroscopy and hemodynamic monitoring, and the current job proves each one with case volume, fluoro time and sedation numbers. The ARRT (R) and (VI) registrations sit under certificates, and 6 years in IR suites after 3 years of general radiography fits a senior IR role.
Why this resume works:
- Staff 4-6 interventional radiology procedures a day as scrub or circulator, including fibroid embolization, TIPS and stents.
- Operate fluoroscopy and DSA with dose tracking, cutting median fluoro time for port placements from 4.1 to 2.9 minutes.
- Monitor hemodynamic and ECG readings in about 80 moderate sedation cases a month and alert the team to changes.
Cath Lab Technologist Resume Example
Cath lab postings name Impella, IVUS, balloon pump, hemodynamic monitoring, sterile technique and Epic most, and every one of them appears in a bullet with a case count or documentation result. The RCIS and ARRT credentials lead the certificates, and 6 years in high-volume cath and EP labs fits a senior cath lab role.
Why this resume works:
- Staff 5-7 cardiac catheterization and PCI cases a day as scrub or circulator, including IVUS and FFR-guided stenting.
- Run the hemodynamic monitoring system as recorder, logging pressures and calling out rhythm changes in real time.
- Set up Impella and balloon pump support for 8-10 high-risk PCI and cardiogenic shock cases a month.
Special Procedures Technologist Resume Example
Special procedures postings ask for interventional radiology, fluoroscopy, CT, patient positioning and sterile technique, and the current job covers each with daily case counts and setup-time results. ARRT (R) and (VI) registrations are listed first under certificates, and the earlier radiography job shows the steady move into special procedures.
Why this resume works:
- Perform 5-8 special procedures a day, including angiograms, PICC and port placements, paracentesis and nephrostomy tubes.
- Run CT-guided lung, liver and bone biopsies with the radiologist, about 35 cases a month.
- Plan patient positioning for prone, oblique and lateral approaches, cutting room setup time from 20 to 12 minutes.
What employers ask for in radiologic technologist job postings
Radiologic Technologist job postings in the US, October 2026
- 23,351
- active US job postings
- 1,544
- employers hiring
- 1 yr
- median experience asked
- 61%
- ask for 1 year or less
Make sure your resume shows
- ARRT registration (34% of employers)
- Graduate of an accredited radiologic technology program (33% of employers)
- At least 1 year of radiology experience (19% of employers)
- Strong interpersonal and communication skills (15% of employers)
- Current BLS/CPR certification (11% of employers)
- High school diploma or equivalent (11% of employers)
- Knows radiology procedures and protocols (10% of employers)
Duties to build your bullet points around
What employers write most often under responsibilities. Show each one with a result (numbers, scale, outcome), not a copy of the duty.
- Prepare and position patients for imaging exams (14%)
- Explain procedures to patients and keep them comfortable and safe (20%)
- Use radiation protection to limit dose to patients and staff (11%)
- Keep accurate patient records and documentation (10%)
- Review images for quality before they go to the radiologist (10%)
The examples on this page, in job postings
| Example | US postings | Median years asked | Skills that set this role apart |
|---|---|---|---|
| Radiologic Technologist | 1,736 | 1 | – |
| MRI Technologist | 1,573 | 1 | mri procedures, mri equipment, mri experience, mri |
| CT Technologist | 2,319 | 1 | – |
| Mammography Technologist | 826 | 1 | mammography |
| X-Ray Technologist | 497 | 1 | hipaa |
| Interventional Radiology Technologist | 260 | 1 | sterile technique, cardiac catheterization, hemodynamic monitoring |
| Cath Lab Technologist | 173 | 2 | – |
| Special Procedures Technologist | 90 | 2 | – |
Which job title to put on your resume: the titles employers use most, so recruiters and applicant tracking systems search for them: Radiologic Technologist (431 employers), MRI Technologist (395 employers), CT Technologist (381 employers), Radiology Technologist (324 employers), Mammography Technologist (241 employers).
Source: Owlapply analysis of active US job postings, October 2026. Requirements and duties are grouped by meaning from the postings' own bullet lists and counted once per employer.
Advertised pay, experience and the skills employers ask for: Radiologic Technologist pay and requirements.
Check your radiologic technologist resume against a real job posting
- Paste a radiologic technologist job posting into the job match score tool to see which of its skills your resume is missing.
- Upload your resume to the ATS resume checker to read the text an applicant tracking system gets from it.
Radiologic Technologist resume sample (text you can copy)
This is the text of the Radiologic Technologist example above. Paste it into the resume builder and replace the details with your own.
Radiologic Technologist resume sample
DANIELLE ORTIZ
Radiologic Technologist
Phoenix, AZ · (602) 555-0147 · [email protected] · linkedin.com/in/danielleortiz
SUMMARY
ARRT-registered Radiologic Technologist with 5 years of hospital and outpatient experience performing radiographic procedures, fluoroscopy and portable exams for up to 45 patients per shift. Practices ALARA and radiation safety on every exam, reviews images in PACS before they reach the radiologist, and explains each procedure clearly to anxious or injured patients.
EXPERIENCE
Radiologic Technologist, Desert Valley Medical Center, Phoenix, AZ | 06/2023 - Present
- Perform 35-45 radiographic procedures per shift across the ED, inpatient floors and OR, including portable and trauma series.
- Position patients for about 60 fluoroscopy exams a month, keeping sterile technique during joint injections and arthrograms.
- Review every image for quality in PACS before release, holding a personal repeat rate under 3% in two annual audits.
- Apply ALARA collimation, shielding and technique charts on all exams; badge dosimetry stays below 5% of the annual limit.
Radiologic Technologist, Saguaro Orthopedic & Imaging, Mesa, AZ | 07/2021 - 05/2023
- Completed 30+ extremity, spine and weight-bearing exams per day for 6 orthopedic surgeons and 3 physician assistants.
- Explained diagnostic imaging procedures to each patient and confirmed orders, allergies and pregnancy status before exposure.
- Documented exams in the RIS with correct medical terminology and HIPAA rules, passing 4 of 4 quarterly chart audits.
- Ran morning warm-ups and QC checks on 3 DR rooms and reported 2 detector faults to biomedical engineering early.
Radiology Aide, Camelback Imaging Associates, Phoenix, AZ | 09/2019 - 05/2021
- Prepared 40+ patients a day for X-ray, CT and ultrasound, gowning them and checking orders against the schedule.
- Transported patients by wheelchair and stretcher between the waiting area and 5 imaging rooms.
- Scanned and filed requisitions in the RIS, clearing a 2-week paperwork backlog in the first month.
EDUCATION
Associate of Applied Science, Radiologic Technology, GateWay Community College, Phoenix, AZ | 05/2021
SKILLS
Radiographic Procedures, Fluoroscopy, PACS, Radiation Safety, ALARA, Diagnostic Imaging Procedures, Medical Terminology, HIPAA, Sterile Technique, Communication Skills
CERTIFICATIONS
ARRT Registered Technologist in Radiography (R), American Registry of Radiologic Technologists (07/2021)
Medical Radiologic Technologist Certificate, Arizona Department of Health Services (08/2021)
BLS Provider, American Heart Association (02/2025)
How to write a radiologic technologist resume
Write a radiologic technologist resume summary
- Open with your ARRT registration and the modalities you hold, such as (R), (CT), (MR), (M) or (VI); about 34% of employers ask for ARRT registration.
- Name your setting and volume, such as a Level II trauma hospital at 25-30 CT patients per shift or an urgent care at 25-35 exams a shift.
- Mention the equipment you run, such as 1.5T and 3T MRI scanners, 3D tomosynthesis units, fluoroscopy or portable units.
- Add one patient-care line, such as calming anxious or injured patients, since explaining procedures is one of the duties employers name most.
X-Ray Technologist summary (entry level)
ARRT-registered X-Ray Technologist with 14 months of urgent care experience and 1,850 clinical hours from an accredited radiologic technology program. Performs 25-35 radiographic exams a shift, follows ALARA and radiation safety rules on every exposure, and keeps patient care calm and clear for walk-in patients of all ages, from toddlers with wrist injuries to older adults after falls.
Radiologic Technologist summary (mid level)
ARRT-registered Radiologic Technologist with 5 years of hospital and outpatient experience performing radiographic procedures, fluoroscopy and portable exams for up to 45 patients per shift. Practices ALARA and radiation safety on every exam, reviews images in PACS before they reach the radiologist, and explains each procedure clearly to anxious or injured patients.
Interventional Radiology Technologist summary (senior level)
ARRT-registered Interventional Radiology Technologist with 9 years in imaging, the last 6 in IR suites at two Houston-area hospitals. Scrubs and circulates 4-6 interventional procedures a day, from embolization and TIPS to stents and drains, with strict sterile technique, radiation safety and hemodynamic monitoring.
Write radiologic technologist experience bullets
- Give exam or case volume per shift or day for each job, and the exam types: trauma, stroke, contrast, screening or interventional.
- Show radiation safety with numbers, such as dose audit results, fluoro time or repeat-exposure rates.
- Show image quality: repeat or reject rates, images sent to PACS without callbacks or audit scores.
- For CT, MRI and IR roles, include IV starts and first-stick rates, sterile technique and the clinical cases you completed for the credential.
Radiologic Technologist experience bullets
- Perform 35-45 radiographic procedures per shift across the ED, inpatient floors and OR, including portable and trauma series.
- Position patients for about 60 fluoroscopy exams a month, keeping sterile technique during joint injections and arthrograms.
- Review every image for quality in PACS before release, holding a personal repeat rate under 3% in two annual audits.
- Apply ALARA collimation, shielding and technique charts on all exams; badge dosimetry stays below 5% of the annual limit.
Pick the skills for a radiologic technologist resume
- PACS is the most distinctive skill in these postings (about 7%), and radiation safety appears in about 5%; list both with the systems you use.
- Communication (about 18%), interpersonal skills (about 10%) and customer service (about 9%) are the soft skills employers name most; show them with patients and radiologists.
- Add the modality skills of your target job, such as MRI safety, cross-sectional anatomy, venipuncture, fluoroscopy, MQSA quality control or hemodynamic monitoring.
Do's and don'ts
Do this
- List each ARRT credential with its letters and year, and your state license if your state requires one.
- Put your accredited program and degree in the education section; about 33% of employers ask for it.
- Keep BLS/CPR current and on the page.
- Give per-shift exam counts so the reader can judge the pace you work at.
Avoid this
- Don't write "performed X-rays" without the exam types, setting and volume.
- Don't leave out clinical rotation hours when you are new; they count toward the year of experience employers prefer.
- Don't list ALARA as a skill alone; show how you practice it on each exam.
- Don't apply to CT or MRI roles with a general radiography resume; lead with the modality, the scanner and the procedures.
Related resume examples
- Nuclear Medicine Technologist
- Ultrasound Technologist
- Radiation Therapist
- Surgical Technologist
- Physicist
- Registered Nurse
- Medical Assistant
- Dental Assistant
Radiologic Technologist resume questions
What should I put on a radiologic technologist resume?
A short summary with your ARRT registration, modalities, setting and exam volume, your jobs with exam counts and radiation safety results, a skills list and your accredited program. About 34% of employers ask for ARRT registration and about 33% for graduation from an accredited radiologic technology program. The duties they describe most are preparing and positioning patients and explaining procedures.
How much experience do radiologic technologist jobs ask for?
Of the 3,750 postings that state experience, the median ask is 1 year, and about 61% ask for a year or less. About 19% of employers write that they prefer at least one year of radiology experience. Cath lab and special procedures roles in the examples ask for about 2 years.
How do I write a new grad rad tech resume?
Put your ARRT registration, your accredited program and your clinical hours at the top, such as 1,850 clinical hours. List the rotation sites and the exam types you completed, and the volume you handled per shift. Add BLS/CPR, since about 11% of employers ask for current certification.
What is different on a CT or MRI technologist resume?
Lead with the advanced credential, such as ARRT (CT) or (MR), and the scanners you run, then show scan volume, contrast studies and IV starts. MRI postings stress MRI procedures and MRI equipment. MRI Technologist and CT Technologist are the second and third most common titles in this data, used by 395 and 381 employers.
What skills should a radiologic technologist list?
Communication (about 18% of postings), interpersonal skills (about 10%) and customer service (about 9%) are named most, with PACS in about 7% and radiation safety in about 5%. Add the procedures and equipment you know, such as fluoroscopy, portable exams, venipuncture or sterile technique. Show each one in a bullet with a number.
Should I list my ARRT registration number on my resume?
List the credential, the modalities and the year earned, such as ARRT (R)(CT); many technologists also add the registration number so employers can verify it quickly. Put it in the summary and again in a certificates section. Add your state license next to it if your state issues one.