Stationary Engineer resume examples
This page has 12 one-page stationary engineer resume examples, from a Stationary Engineer I making plant rounds to a chief building engineer running a 900,000 sq ft campus, with building, operating, boiler and critical facilities roles in between. Each one is checked against 1,016 US postings from 426 employers, and the note under each sample says which systems, licenses and maintenance numbers it puts first.
Stationary Engineer Resume Example
Stationary engineer postings ask most for water treatment, HVAC, plumbing, electrical and energy management systems, and each appears in the summary and in bullets with boiler sizes, alarm response times and PM completion rates. Five years in plant and building operations meets the 3-5 years employers ask for, and the Chicago stationary engineer license sits in the certificates where recruiters look first.
Why this resume works:
- Operate 3 600-HP steam boilers and 4 chillers on rotating shifts, holding critical areas at required temperature and humidity.
- Test boiler and cooling tower water daily and adjust chemical feed, cutting blowdown water use by 15%.
- Respond to energy management system alarms across 1,200 points within 10 minutes on average.
Stationary Engineer I Resume Example
Stationary Engineer I postings ask first for HVAC knowledge, and the bullets show HVAC, boiler and chiller rounds, preventive maintenance counts and building automation checks. Two years in building operations fits the entry level, and the HVAC certificate and EPA 608 card cover the education and refrigerant handling these employers expect.
Why this resume works:
- Run hourly rounds on 2 steam boilers, 3 chillers and cooling towers, recording readings in the plant log.
- Perform preventive maintenance on 60 pumps, fans and air handlers under the chief engineer's PM plan.
- Replace belts, filters and bearings on HVAC units serving 18 campus buildings.
Building Engineer Resume Example
Building engineer postings ask most for HVAC, plumbing, electrical, customer service skills and the ability to work independently, and the summary uses those terms before the bullets prove them with call volumes, same-day close rates and runtime savings. Four years of building maintenance clears the 3-year median, and the BOMI SMT and EPA 608 credentials back the systems knowledge.
Why this resume works:
- Maintain 2 1,200-ton chillers, 22 air handlers and 900 VAV boxes on a preventive maintenance schedule.
- Resolve 120 tenant comfort and repair calls a month, with 95% closed the same day.
- Adjust building automation systems schedules and setpoints, cutting after-hours HVAC runtime by 18%.
Building Maintenance Engineer Resume Example
Building maintenance engineer postings ask for HVAC, plumbing, electrical, organizational skills, attention to detail and independent work, and the summary names each before the bullets show guest-call times and work order counts. Four years across a hotel and a senior living community clears the 3-year median, and the EPA 608 and CPO certificates fit the equipment these buildings run.
Why this resume works:
- Repair PTAC units, fan coils and thermostats in 380 guest rooms, closing 90% of guest calls within 30 minutes.
- Maintain 2 hot water boilers, a cooling tower and pool equipment, keeping water chemistry within code.
- Perform preventive maintenance on 60 guest rooms a month, covering plumbing, electrical and fixtures.
Lead Building Engineer Resume Example
Lead building engineer postings ask for HVAC, electrical, plumbing, mechanical systems, Word and Excel, and the summary names them all while the bullets show a 4-engineer crew, a $1.4M chiller project and monthly Excel and Word reports. Ten years of building operations and a state engineer license put the resume at the lead level.
Why this resume works:
- Lead 4 engineers on day shift, assigning 250 PM and tenant work orders a month.
- Operate 2 steam boilers, 3 chillers and lab exhaust fans serving 60 life science tenants around the clock.
- Direct contractor work on a $1.4M chiller replacement, finishing 2 weeks early with no tenant outages.
Chief Building Engineer Resume Example
Chief building engineer postings ask for HVAC, life safety systems, BAS, CMMS, contract administration and supervisory experience, and each shows up in a bullet with team size, vendor savings or PM completion. Fourteen years with 5 as chief clears the 5-year median, and the BOMI SMA credential backs the management side of the job.
Why this resume works:
- Direct a 7-person engineering team across 3 buildings, covering 24/7 operations and on-call response.
- Manage contract administration for 14 vendors, including elevator, fire alarm and water treatment, saving $180K in rebids.
- Upgrade building automation systems (BAS) controls on 30 air handlers, cutting campus energy use by 16%.
Assistant Chief Engineer Resume Example
Assistant chief engineer jobs ask for someone who can run HVAC, boiler and electrical systems and lead the crew when the chief is out, and the bullets show a 12-person team, 96% PM completion and a $900K retrofit. Eight years across hotels and a hospital fits the senior level, and the BOMI SMT and EPA 608 credentials support the technical claims.
Why this resume works:
- Lead 12 engineers and painters across 3 shifts, setting daily assignments and covering the chief's duties.
- Plan preventive maintenance for 2,400 assets in the CMMS, lifting on-time PM completion to 96%.
- Coordinate a $900K guest room HVAC retrofit for 600 rooms with no lost room nights.
Operating Engineer Resume Example
Operating engineer postings ask for Word, Excel, HVAC, building automation systems, plumbing and electrical, and the summary and bullets cover each with boiler counts, work order volumes and Excel boiler logs. Four years of plant and building work clears the 3-year median, and the Minnesota engineer license is the first thing these employers check.
Why this resume works:
- Operate 3 low-pressure steam boilers and 2 chillers on rotating shifts for the full complex.
- Monitor building automation systems alarms and trends across 50 air handlers, resolving 90% without vendor calls.
- Repair plumbing fixtures, pumps and 480V motor circuits on 150+ work orders a quarter.
Boiler Operator Resume Example
Boiler operator postings ask for high pressure boilers, steam generation, air compressors, preventative maintenance and troubleshooting, and each appears in the summary and in bullets with boiler sizes, training hours and downtime cuts. Two years in plant boiler rooms fits the entry level, and the high pressure boiler license and diploma cover what employers list first.
Why this resume works:
- Operate 2 400-HP high pressure boilers that supply process steam to 3 cooking and sanitation lines.
- Test boiler water each shift and adjust chemical feed, holding TDS and pH within the treatment vendor's limits.
- Perform preventative maintenance on air compressors, dryers and feedwater pumps, cutting unplanned downtime by 20%.
Boiler Plant Operator Resume Example
Boiler plant operator jobs center on safe, compliant operation and maintenance of boiler systems, and the bullets show DCS control of 4 large boilers, fuel switching, water treatment testing and emissions records. Four years in a district energy plant and a paper mill matches the 4-year median, and the NIULPE boiler operator certificate sits where recruiters look first.
Why this resume works:
- Run 4 150,000 lb/hr boilers from the DCS, delivering steam to 120 campus and city buildings.
- Convert boiler firing between natural gas and fuel oil during curtailments, with no steam interruptions in 3 winters.
- Test water treatment levels every 4 hours and adjust chemicals, holding condensate return above 85%.
Boiler Technician Resume Example
Boiler technician postings ask for communication, attention to detail and independent work, and the bullets show solo service on 180 boilers a year, first-visit fix rates and careful service records. Six years of boiler service and installation clears the 5-year median, and the Ohio boiler license backs the hands-on claims.
Why this resume works:
- Maintain 180 commercial boilers a year on maintenance contracts for schools, hospitals and factories.
- Tune burners with combustion analysis, cutting customer gas use by an average of 8% per boiler.
- Repair steam traps, condensate pumps and hydronic piping, closing 90% of calls on the first visit.
Critical Facilities Engineer Resume Example
Critical facilities engineer postings ask for HVAC, electrical and communication skills, and the bullets show chilled water and CRAH operation, live electrical MOPs and incident calls with customers, all at 100% uptime. Seven years in data center plants fits the senior level, and the CDCTP and NFPA 70E credentials match the electrical safety focus of these sites.
Why this resume works:
- Operate chilled water plants, CRAH units and HVAC controls supporting 36 MW of IT load with 100% uptime.
- Write and execute 60+ MOPs a year for UPS, switchgear and generator maintenance on live systems.
- Run monthly load tests on 18 emergency generators and track fuel quality and transfer times.
What employers ask for in stationary engineer job postings
Stationary Engineer job postings in the US, October 2026
- 1,016
- active US job postings
- 426
- employers hiring
- 3 yr
- median experience asked
- 12%
- ask for 1 year or less
Technical skills and tools employers name
| Skill | Share of postings |
|---|---|
| hvac | 30% |
| plumbing | 18% |
| electrical | 19% |
| energy management systems | 6% |
| building automation systems | 7% |
| water treatment | 6% |
| plumbing systems | 6% |
| hvac systems | 6% |
| cmms | 5% |
| troubleshooting | 10% |
Make sure your resume shows
- High school diploma or equivalent (42% of employers)
- Strong verbal and written communication (29% of employers)
- 3-5 years in building operations and maintenance (26% of employers)
- Technical knowledge of HVAC, electrical, mechanical and plumbing systems (20% of employers)
- Valid driver's license and acceptable driving record (15% of employers)
- Reads blueprints, schematics and technical manuals (16% of employers)
- Works independently and handles several tasks at once (11% of employers)
- Lifts up to 50 lbs and works from ladders and lifts (10% of employers)
Duties to build your bullet points around
What employers write most often under responsibilities. Show each one with a result (numbers, scale, outcome), not a copy of the duty.
- Follow safety rules, environmental standards and operating procedures (19%)
- Keep accurate work orders, maintenance records and inspection logs (18%)
- Inspect, maintain and repair HVAC, plumbing and electrical systems (18%)
- Operate, monitor and maintain boiler systems safely (10%)
- Work with tenants, colleagues, vendors and contractors (6%)
- Respond to emergencies and cover after-hours calls (6%)
The examples on this page, in job postings
| Example | US postings | Median years asked |
|---|---|---|
| Stationary Engineer | 171 | 3 |
| Stationary Engineer I | 9 | 3.5 |
| Building Engineer | 267 | 4 |
| Building Maintenance Engineer | 23 | 2.5 |
| Lead Building Engineer | 28 | 3.5 |
| Chief Building Engineer | 29 | 5 |
| Assistant Chief Engineer | 26 | 5 |
| Operating Engineer | 68 | 3 |
| Boiler Operator | 105 | 3 |
| Boiler Plant Operator | 8 | 4 |
| Boiler Technician | 22 | 5 |
| Critical Facilities Engineer | 20 | 3 |
Which job title to put on your resume: the titles employers use most, so recruiters and applicant tracking systems search for them: Building Engineer (108 employers), Stationary Engineer (105 employers), Boiler Operator (81 employers), Operating Engineer (22 employers), Building Maintenance Engineer (18 employers).
Source: Owlapply analysis of active US job postings, October 2026. Requirements and duties are grouped by meaning from the postings' own bullet lists and counted once per employer.
Advertised pay, experience and the skills employers ask for: Stationary Engineer pay and requirements.
Check your stationary engineer resume against a real job posting
- Paste a stationary engineer job posting into the job match score tool to see which of its skills your resume is missing.
- Upload your resume to the ATS resume checker to read the text an applicant tracking system gets from it.
Stationary Engineer resume sample (text you can copy)
This is the text of the Stationary Engineer example above. Paste it into the resume builder and replace the details with your own.
Stationary Engineer resume sample
ROBERT KAMINSKI
Stationary Engineer
Chicago, IL · (773) 555-0136 · [email protected] · linkedin.com/in/robertkaminski
SUMMARY
Licensed stationary engineer with 5 years running boilers, chillers and HVAC systems in a 450-bed Chicago hospital and a downtown office tower. Handles water treatment, energy management system alarms, air compressors, plumbing and electrical repairs, and keeps every log and work order ready for Joint Commission surveys.
EXPERIENCE
Stationary Engineer, Lakefront Medical Center, Chicago, IL | 05/2023 - Present
- Operate 3 600-HP steam boilers and 4 chillers on rotating shifts, holding critical areas at required temperature and humidity.
- Test boiler and cooling tower water daily and adjust chemical feed, cutting blowdown water use by 15%.
- Respond to energy management system alarms across 1,200 points within 10 minutes on average.
- Perform preventive maintenance on air compressors, pumps and air handlers, closing 98% of PM work orders on time.
Maintenance Engineer, Riverbend Office Properties, Chicago, IL | 06/2021 - 04/2023
- Repaired plumbing, lighting and 277V electrical circuits for 40 tenant suites.
- Read blueprints and control drawings to trace VAV and duct problems behind 150 tenant comfort calls.
- Tracked chiller runtimes and utility meter readings in Excel for monthly energy reports.
- Applied NFPA 70E lockout and arc flash rules on every electrical job, with zero safety incidents in 2 years.
EDUCATION
Associate in Applied Science, Heating, Ventilation, Air Conditioning and Refrigeration, Triton College, River Grove, IL | 05/2021
SKILLS
HVAC Systems, Water Treatment, Energy Management System, Air Compressors, Plumbing, Electrical, Troubleshooting, Excel, NFPA 70E, Verbal and Written Communication Skills
CERTIFICATIONS
City of Chicago Stationary Engineer License, City of Chicago Department of Buildings (02/2023)
EPA Section 608 Universal Certification, U.S. Environmental Protection Agency (04/2021)
How to write a stationary engineer resume
Write a stationary engineer resume summary
- Open with your engineer or boiler license, its class and state, and your years in plant or building operations.
- Name the building type and size: hospital, office tower, hotel, university plant, data center or district energy plant.
- List the main equipment you run, such as steam boilers by horsepower, chillers by tonnage, cooling towers and the building automation system.
- For chief and assistant chief roles, add team size and the budgets or vendor contracts you manage.
Stationary Engineer I summary (entry level)
Stationary engineer I with 2 years in building operations, including 14 months in a university central plant. Makes rounds on boilers, chillers and HVAC equipment, handles preventive maintenance on pumps and air handlers, and records readings and work orders in the CMMS for the chief engineer.
Stationary Engineer summary (mid level)
Licensed stationary engineer with 5 years running boilers, chillers and HVAC systems in a 450-bed Chicago hospital and a downtown office tower. Handles water treatment, energy management system alarms, air compressors, plumbing and electrical repairs, and keeps every log and work order ready for Joint Commission surveys.
Assistant Chief Engineer summary (senior level)
Assistant chief engineer with 8 years in hotel and hospital engineering in Los Angeles, now second in charge of a 12-person department at a 600-room hotel. Runs HVAC, boilers, chillers and building automation systems, plans preventive maintenance in the CMMS, and leads the team whenever the chief is off site.
Write stationary engineer experience bullets
- Count equipment and assets: boilers and chillers operated, air handlers maintained, assets tracked in the CMMS.
- Show preventive maintenance results, such as on-time PM completion rates and work orders closed a month.
- Give response and uptime numbers: alarm response times, tenant calls closed the same day, outages avoided.
- Report savings and inspections passed, such as energy or water cuts from setpoint and water treatment changes and clean state boiler inspections.
Stationary Engineer experience bullets
- Operate 3 600-HP steam boilers and 4 chillers on rotating shifts, holding critical areas at required temperature and humidity.
- Test boiler and cooling tower water daily and adjust chemical feed, cutting blowdown water use by 15%.
- Respond to energy management system alarms across 1,200 points within 10 minutes on average.
- Perform preventive maintenance on air compressors, pumps and air handlers, closing 98% of PM work orders on time.
Pick the skills for a stationary engineer resume
- HVAC (about 30% of postings), electrical (about 19%) and plumbing (about 18%) are the trade skills employers name most; list each with the equipment you work on.
- Add the systems that set this job apart: energy management systems and water treatment (about 6% each) and CMMS (about 5%).
- Communication (about 26%) and customer service (about 14%) matter for tenant-facing roles, and Excel (about 13%) and Word (about 11%) cover logs and reports.
Do's and don'ts
Do this
- Put your stationary engineer, boiler or refrigerant license in a certificates line near the top, with the class and state.
- Say you read blueprints, schematics and technical manuals; about 16% of employers ask for it.
- Show shift coverage, on-call work and emergency response if you have done it.
- Mention the logs and inspections you keep, from boiler logs to Joint Commission or fire inspections.
Avoid this
- Don't write "maintained building systems" without naming the equipment, its size and the result.
- Don't leave out building maintenance or HVAC work outside a plant; about 26% of employers ask for 3-5 years in building operations and maintenance or similar.
- Don't list software without context; tie the CMMS or building automation system to work orders closed or alarms resolved.
- Don't skip safety; about 19% of employers write compliance with safety and environmental rules into the duties.
Related resume examples
- Facilities Manager
- Maintenance Technician
- HVAC Technician
- Plumber
- Field Service Technician
- Electrician
- Welder
- Construction Worker
Stationary Engineer resume questions
What should I put on a stationary engineer resume?
A summary with your license, years and building type, then jobs with equipment sizes, PM completion and response times, a skills list and your education. Employers most often ask for a high school diploma (about 42% of employers), strong communication (about 29%) and 3-5 years in building operations and maintenance (about 26%). Name your HVAC, boiler, electrical and plumbing work plainly.
How much experience do stationary engineer jobs ask for?
Of the 487 postings that state experience, the median ask is 3 years, and about 12% ask for a year or less. Boiler operator roles in the examples ask for about 3 years and building engineer roles for about 4, while chief building engineer roles ask for about 5. Count HVAC, maintenance and plant helper work toward your total.
How do I write a building engineer resume?
Show the building, the systems you keep running and the tenant calls you handle. Building engineer postings ask most for HVAC, plumbing, electrical, customer service skills and the ability to work independently, so give chiller and air handler counts, calls closed the same day and runtime savings from building automation changes. BOMI or EPA 608 credentials help here.
What goes on a boiler operator resume?
Lead with the boilers you run: pressure class, horsepower or steam output, and what the steam feeds. Boiler operator postings ask for high pressure boilers, steam generation, air compressors, preventative maintenance and troubleshooting, and the median ask in the example is 3 years. Add water testing, hourly rounds and your boiler license.
What should a chief building engineer resume include?
Give the size of the portfolio, the team you lead, the budgets you manage and the vendor contracts you run. Chief building engineer postings ask for HVAC, life safety systems, BAS, CMMS, contract administration and supervisory experience, and the median ask in the example is 5 years. Show PM completion, energy savings and money saved on rebids.
What skills should a stationary engineer resume list?
HVAC appears in about 30% of postings, communication in about 26%, electrical in about 19% and plumbing in about 18%. Customer service (about 14%), Excel (about 13%) and Word (about 11%) follow, then troubleshooting at about 10%. Add CMMS, energy management systems, boilers and water treatment if you use them.